Defender-Lonestar
New member
- Joined
- Dec 25, 2021
- Messages
- 16
- Reaction score
- 1
Who has tried dynojet , evolution or even sxstechntuning to tune your hd10. Is tuning going to make a noticeable improvement?
Hd10 Tuning
- Thread starter Defender-Lonestar
- Start date
https://www.dynojet.com/power-vision-3-for-can-am-defender/
I have the Dynojet Power Vision 3 on my 2019 Defender hd10 xt. Most noticeable differences is the fact it runs cooler due to the fan temp change and the low speed lunge is no more. As far as doing burnouts from HP increase, not there. Never have known what my top speed is due to not being able to stand on the accelerator for too long, due to lack of straight aways. But I’d say when ya pin the pedal to the floor it’s breaking tires loose in dirt, gravel, etc.
I have the Dynojet Power Vision 3 on my 2019 Defender hd10 xt. Most noticeable differences is the fact it runs cooler due to the fan temp change and the low speed lunge is no more. As far as doing burnouts from HP increase, not there. Never have known what my top speed is due to not being able to stand on the accelerator for too long, due to lack of straight aways. But I’d say when ya pin the pedal to the floor it’s breaking tires loose in dirt, gravel, etc.
Andystoy19
Active member
- Joined
- Apr 24, 2019
- Messages
- 714
- Reaction score
- 159
Check out this thread:
2019 Defender XT Cab HD10 ECM Monster FI reflash in the builds section. It is still running well today.
2019 Defender XT Cab HD10 ECM Monster FI reflash in the builds section. It is still running well today.
