What's new

2023 Defender 4WD rocker switch

Coolcraigster26

New member
Joined
Jun 26, 2023
Messages
17
Reaction score
0
I have a new 2023 defender max. I noticed when in 2WD the rocker switch has the lower part of the switch lit up letting you know it’s in 2WD. When I flip the switch to 4WD the light for the 2WD side goes out like it should but the top part (4WD) does not light up. It does go into 4WD but I’m just curious if this is normal or is the 4WD side of my switch burnt out? Looking for some advice from someone who has a 2023 with the same switch in the picture. I’m thinking if the bottom lights up in 2WD then the top should light up in 4WD.
IMG_3368.webp


 
Last edited by a moderator:
I have a 2023 can am defender 6x6 hd limited and when I flip my switch the top does not light up but it shows up on the dash pannel

 
I have a 2023 can am defender 6x6 hd limited and when I flip my switch the top does not light up but it shows up on the dash pannel
Ok I guess my switch is fine then. Yes mine does show it going into 4WD on the digital panel also. I was just thinking it’s odd that the 2WD side lights up in 2WD but the 4WD side does not light up when in 4WD. Thanks for your help. 

 
I will double-check on mine, but I'm pretty sure it only lights up in 2WD.

 

Users who are viewing this thread

Active Topics

Back
Top