2020 Defender HD8 3 Mode Switch Plug Location?

[plumber802]

I have a 2020 base model HD8 and want to add the 3 mode switch  (Normal/Work/Eco)  P/N 715004445. I checked under the dash and there isn't a plug available. There is a small bundle of zip tied wires with male ends but no square connector that would work with the switch. Any ideas. Thanks.

 

[A hunt 2 remember]

Is that an OEM option for that model? If not that may be why no plug. I dont know, but maybe ask your local dealer. Good luck

 

[plumber802]

Is that an OEM option for that model? If not that may be why no plug. I dont know, but maybe ask your local dealer. Good luck

Thanks for the quick reply. I did call the dealer and after a little research was able to determine that the 3 modes are incorporated into the cluster even on my base model. This is why it's important to read the owner's manual .

 

[A hunt 2 remember]

By the way, WELCOME to the forum!! 

 

[Guest]

Thanks for the quick reply. I did call the dealer and after a little research was able to determine that the 3 modes are incorporated into the cluster even on my base model. This is why it's important to read the owner's manual .

Which wires do you use from that cluster to hook up the switch then? Couldn’t find anything in owners manual on it....

 

[plumber802]

By the way, WELCOME to the forum!! 

Thanks bud!