Recent content by joshua

  1. J

    2021 Can am defender melted impeller fan

    I changed the water pump seal, and the impeller. Flushed things out as best I could, and Its working great. I ran it pretty hard, and it kept the temp at around 175
  2. J

    2021 Can am defender melted impeller fan

    No I didn't I Just checked it cranked it over without opening the TB. I got the parts for it coming today so we will see if that takes care of it. 
  3. J

    2021 Can am defender melted impeller fan

    So I did a compression test, and one was 175, and the other 160. I really am pretty ignorant to how close they should be.. does that seem normal?
  4. J

    2021 Can am defender melted impeller fan

    Thanks for the response! Looks like I might have a project on my hands😏 I flushes out the radiator, and nothing came out. But a bunch of kinda grey goey like substance came out of the hose when I flushed that out.. So not sure what that came from.. the one that goes from the water pump to the...
  5. image_0.webp

    image_0.webp

  6. image_0 2.webp

    image_0 2.webp

  7. PHOTO-2024-01-25-17-48-04.webp

    PHOTO-2024-01-25-17-48-04.webp

  8. J

    2021 Can am defender melted impeller fan

    Hey, I have an issue with my 2021 can am defender hd10 that has me in the dark. I’ll quickly try to go thru what happened so everything makes sense. I had it sitting outside when it was around negative 20 degrees outside for about 6 hours when I went to go start it it started really hard and i...
  9. J

    2020 can am defender hd 10 overheating issues.

    Hello, I have a defender with a aftermarket heater that the previous owner installed, and when driving normally the temp is about at 180-190 then as soon as you start going slow or let it just idle it heats up to about 220 which seems pretty high. the fan does come on at around 205 but doesn't...
Back
Top