Recent content by Hutch2022

Thanks for the reply.  I called Turner earlier and they mentioned that they have seen issues with the catvos lifts.  I am to the point where i think im gonna take the lift off.  I've had nothing but problems but don't want to get something else that is going to cause more axle issues.  I am...

I have a 2019 canam HD10 cab model with a 3" catvos suspension lift and spring upgrade.  Has 32 in Maxxis carnivore tires, rhino 2.0 axles in the rear and gorilla axles in the front.  I had alot of problems with axle boots when i first got it and carried it to the Catvos shop in Shreveport to...

Hey I have a 2019 xt cab model as well. I am having lots of issues with the front diff and wanted to see if you guys know the correct axle length for the front axles. My bike has a 3 in catvos lift and has gorilla axles in the front. I'm starting to wonder if my front axles are the wrong length...

If you could post that procedure for adjusting the backlash I would appreciate it.  I only had one shim in the diff when I took it apart.  If I need more would I have to get from a canam dealer or could I find them somewhere else?

Quick update on my front diff.  I got a sleeve put in the main gear carrier as I mentioned above. I went ahead and replaced the bearings in the diff as well when I put it back together.  Now ever since I have lots of gear noise...popping...that seems to be coming from the differential now.  Any...

The other side does not have any play at all. The inner circlip on this side was missing so it probably allowed alot more movement on the right side than the left.  I dropped it off at a machine shop and they're going to bore it out and put a bushing in. I'll try to post a video when I get it...

Thanks....thats what I'm afraid of is that I'm gonna have to replace it.  I am gonna check to see if I can carry it to a machine shop to get welded and turned back downwhich I figure would be cheaper than $1000....but who knows. Any ideas where I could find a used one?

I am having issues with my front differential on my 19 defender HD10.  I had a leaking seal and what I thought was a bad right axle. Turns out my axle inner cv did need to be replaced but it has also worn my differential as well.  This is the main gear housing that the right axle fits into. Now...

Thanks for the responses.  Actually figured out it was my own mistake....the outer race of my wheel bearing was missing and I didn't realize it when I put the hub on....dont know how i missed it but sure did.... I Replaced wheel bearing and it's all good now!

Hi I have a 2019 hd10 cab version that has a catvos 5 inch lift and 32 in tires. Very clean bike and I got it a couple of weeks ago.   The first ride both rear axles had busted boots. This ride was strictly on pavement as well nothing rough. I had the boots replaced and they busted again after...